|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |

Aprudena Gist
Caldari Chokdi Science and Industry
|
Posted - 2007.09.26 18:59:00 -
[1]
Originally by: Ryu Kibegami Edited by: Ryu Kibegami on 19/09/2007 14:34:16 I am wondering if this ok for lev 4
High 6 arb cruis 2 dim pow nos
med 2 Large Shield Extender II 3 Shild Recharg II 1 V-M15 Braced Multispectral Shield Matrix
low 4 Beta Reactor Control: Shield Power Relay I 1 PDS II
5 Vespa I
15857 shield 299 recharge
Any help would be appreciated
Not its not a good setup at all
6x Arb Cruse 2xNos
Med: 2xLSE II 1xX-Large SB 1xShield Boost Amp 1xEM Shield Harden 1xInvu II's
Low: 3xPDSII 2xBCU II
Rig 3x CCC I's
It should be in the same price range.
|

Aprudena Gist
Caldari Chokdi Science and Industry
|
Posted - 2007.10.15 23:29:00 -
[2]
Originally by: Lucas Edge Hate to beat this dead horse further but can somebody check out my setup below? It's very similar to others except I'm using cap relays instead of flux coils. I get much higher cap recharge using the relays over the fluxes but at the expense of shield boosting. However, I have fitted a xlarge named booster which can still boost 300+ sp every 4 seconds even after the cap relay penalty. I can swap one of the hardeners for a boost amp (which will null the cap penalty) but figured an extra hardener would suite better and would enable me to keep the booster off longer to recharge the cap, although I can run for a long time with the booster perma running around 30% cap.
I will be testing this fitting with some corp mates later to see how long my sheild can sustain damage before (if) they break my tank but just thought I'd get some opinions here before wasting my time and/or making a fool of myself.
Bio - 3.5 month old character with 3.7mil in mostly combat skills (missiles, navigation, shield/cap regen, and some drones) as well as the following attributes: Intel 17, Perc 20, Char 9, Willpwr 22, Mem 17.
Thanks!
Thank tank wont hold for very long only 3m25s of max run time.
|

Aprudena Gist
Caldari Capital Development and Security Industries
|
Posted - 2007.10.23 22:11:00 -
[3]
Originally by: Erozz Edited by: Erozz on 23/10/2007 16:03:16
Originally by: Sandovar What are the panels views on a Passive Raven set up?
Raven with "Drake fit" :)
6xArbalest Cruise, 2xDrone link augs (or w/e) 3xLarge extender II, 3x Active Hardeners 2xSPR II, 2xBCS II, 1xPDS II (to offset the cap nerf of the SPRs to allow the 3 hardeners to perma) 3xCDFP rigs
18.5K shields, 85/sec peak.
Not bad. You could certainly run some L4 missions in it, but not all. Personally I wouldn't risk it :)
to make it close to the tank of a drake you would have to do something like this.
6x Arb's 2xwhatever 3xLSE II 3xActiver hardens (Em/Ken/Thermal) 5xSPR II's 3xPurgers i got something like 18000 sheilds and a peak of about 220.
|

Aprudena Gist
Caldari Capital Development and Security Industries
|
Posted - 2007.11.06 04:35:00 -
[4]
recently i've started to run into those mutli-damage types missions alot and came up with a new config for it
6x Arb Torps
1xX-Large Booster II 2xInvunerabilty Field II's 2xSBA II's 1xCap Recharger II
1xBCU II 4xCFC II
3xCCC
has a perm run tank 48.3 EM 58.6 Therm 69.0 Kenetic 78.4 Explosive
|
|
|
|